The innovative design and rugged construction of the M3600 Viscometer
make it equally at home in the field or in the laboratory.
Download Brochure : M3600 Viscometer
M4600 HPHT Linear Swell Meter
The patented design of the M4600 hardware allows core samples to expand in only one direction, making test results extremely repeatable.
The Grace Instrument M4600 HPHT Linear Swell Meter is an automated, dual core, high pressure and high temperature linear swell meter (up to 2,000 psi and 500 °F). It is engineered to measure the volumetric expansion (or contraction) of a core/wafer sample under simulated downhole conditions while saturating it with a drilling fluid sample.
The Grace Instrument M4600 HPHT Linear Swell Meter provides the most repeatable test results on the market today. The patent-pending design allows core samples to expand in only one direction, making test results very repeatable.
Download Brochure : M4600 HPHT Linear Swell Meter
M5600 HPHT Rheometer
Due to the patented design, The M5600 HPHT Rheometer provides direct reading inside
the pressure vessel and employs no bob shaft bearings. That means lower maintenance costs
while allowing continuous testing of corrosive samples.
Download Brochure : M5600 HPHT Rheometer
M7350 Ultrasonic Cement Analyzer
The Grace Instrument M7350 Ultrasonic Cement Analyzer (UCA) is used to perform compressive, non-destructive strength tests on cement slurries under controlled conditions of temperature and pressure.
In these tests, the M7350 UCA transmits an ultrasonic pulse through a cement slurry sample. By measuring the length of time required for the pulse to travel through the sample, the M7350 PC software determines the compressive strength of the cement.
As the cement hardens, the pulse transit time becomes shorter, allowing the M7350 PC software to calculate changes in the compressive strength of the cement sample over time. This data is then collected into a customized database for comprehensive analysis, including comparison with data from previous tests. This data can also be easily exported in spreadsheet format.
Download Brochure : M7350 Ultrasonic Cement Analyzer
M7280 HPHT Dual Cell Consistometer
The Grace Instrument M7280 HPHT Dual Cell Consistometer was developed with laboratory efficiency in mind, enabling the operator to perform accurate, dependable test operations with minimal preparation time. The innovative hardware design makes the instrument easy to set up, easy to use and easy to clean. The custom PC software included with each unit allows the user to construct test sequences, run tests, and interpret test results quickly and efficiently.
The M7280 measures slurry consistency while the slurry is subjected to simulated a wide range of downhole conditions of temperature and pressure up to 40,000 psi (275 MPa) and 600° F (315° C). This instrument can simultaneously perform two independent tests.
Download Brochure : M7280 HPHT Dual Cell Consistometer
M2200 HPHT Lubricity, Dynamic Filtration, and Drilling Simulator
The M2200 HPHT Lubricity, Dynamic Filtraion, and Drilling Simulator provides multiple test functions in one compact unit, offering a computer-controlled test environment which can realistically simulate high pressure high temperature downhole conditions while allowing the user to perform multiple test functions, saving money, training and research time, and the laboratory space that multiple test devices would otherwise require.
Download Brochure : M2200 HPHT Lubricity, Dynamic Filtration, and Drilling Simulator
M7450 Curing Chamber
The Grace Instrument M7450 Curing Chamber is specifically designed to cure standard two-inch cement cube samples for compressive strength testing in accordance with API and ISO standards for oilfield cements. The user is able to specify conditions of temperature and pressure in order to simulate a wide variety of downhole conditions during the curing process.
Test sequences can be created to monitor sample behavior under changing environmental conditions, as well.
The curing chamber system design optimizes operator safety by emphasizing pressure relief and protection from high temperatures, and the panel button and handle configuration has been designed to maximize both safety and ease of use.
Download Brochure : M7450 Curing Chamber
M7550 Consistometer/ SGS Tester
The Grace Instrument M7550 Consistometer/SGS Tester was developed with laboratory efficiency in mind, enabling the operator to perform accurate, dependable test operations with minimal preparation time. The M7550 hardware design allows for testing cement slurries up to 600 °F with pressures as high as 30,000 psi.
The M7550 measures slurry consistency, or thickening time, by testing a sample of the cement slurry while the slurry is subjected to simulated downhole conditions of temperature and pressure.
The custom PC software included with each unit allows the user to construct test sequences, run tests, and interpret test results quickly and efficiently.
Download Brochure : M7550 Consistometer/ SGS Tester
M3080 Variable Speed Mixer
Users can create custom speed and timing sequences using the
M3080 Variable Speed Mixer controls. This allows the creation
of mixing sequences which are exactly configured to meet the
requirements of your test fluids and cements. Then, once created,
these customized sequences can be run automatically, at the
touch of a button. Alternatively, two constant speed ranges,
4,000 rpm and 12,000 rpm, are also available automatically,
allowing the user to choose an API speed while adding cement.
Download Brochure : M3080 Variable Speed Mixer
M8500 Ultra HPHT Dynamic Sagging Tester
Contact with pressurization fluid can compromise the integrity of sag test resultes. The M8500 HPHT Dynamic Sagging Tester prevents any contact between the test sample and the pressureization fluid, because the innovative design, in particular the accumulator piston, prevents the test sample from contact with any other fluid, from pressure chamber to pycnometer.
Download Brochure : M8500 Dynamic Sagging Tester
Grace Instrument Indonesia